Product Specs
Engine
- Engine Model
- Cat® C32 ACERT™
- Gross Power
- 907 hp
- Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995
- 900 hp
- Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249
- 814 hp
- Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
- 907 hp
- Emissions (Tier 2 Equivalent): Net Power ISO - 9249
- 814 hp
- Rated Speed
- 1750 r/min
- Bore
- 5.7 in
- Stroke
- 6.4 in
- Displacement
- 1958 in²
- Peak Torque - 1,200 rpm
- 3139 lb/ft
- Torque Rise
- 30 %
- Note (1)
- Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
- Note (2)
- Net torque rise meets SAE J139.
- Note (3)
- No engine derating required up to 3050 m (10,000 ft) altitude.
Weights
- Operating Weight
- 224254 lb
Transmission
- Transmission Type
- Cat Planetary Power Shift
- Converter Drive - Forward 1
- 4.4 mile/h
- Converter Drive - Forward 2
- 7.7 mile/h
- Converter Drive - Forward 3
- 13.2 mile/h
- Converter Drive - Reverse 1
- 4.8 mile/h
- Converter Drive - Reverse 2
- 8.4 mile/h
- Converter Drive - Reverse 3
- 14.6 mile/h
- Direct Drive - Forward 1
- Lock-up disabled
- Direct Drive - Forward 2
- 8.1 mile/h
- Direct Drive - Forward 3
- 14.2 mile/h
- Direct Drive - Reverse 1
- 5 mile/h
- Direct Drive - Reverse 2
- 8.9 mile/h
- Direct Drive - Reverse 3
- 15.6 mile/h
- Note
- Travel speeds based on 45/65-45 L-5 46 ply tires.
Hydraulic System - Lift/Tilt
- Output at 1,850 rpm and 6900 kPa (1,000 psi)
- 161 gal/min
- Cylinders, Double Acting - Lift, Bore and Stroke
- 177 mm × 1760 mm (0.58 ft × 5.8 ft)
- Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
- 267 mm × 286 mm (0.88 ft × 0.94 ft)
- Relief Valve Setting - Lift (Large Pump)
- 3289 psi
- Relief Valve Setting - Tilt (Small Pump)
- 3560 psi
Service Refill Capacities
- Fuel Tank - Standard
- 413 gal (US)
- Cooling System
- 53 gal (US)
- Crankcase
- 32 gal (US)
- Transmission
- 45 gal (US)
- Differential - Final Drives - Front
- 98 gal (US)
- Differential - Final Drives - Rear
- 90 gal (US)
- Hydraulic System - Implement and Brakes - Tank Only
- 81 gal (US)
- Hydraulic System - Steering and Engine Cooling Fan - Tank Only
- 77 gal (US)
Axles
- Front
- Fixed
- Rear
- Oscillating at ±10 degrees
- Maximum Single-Wheel Rise and Fall
- 22.6 in
Brakes
- Brakes
- Meets ISO 3540:2011
Blades
- Blade Capacities
- 25 to 45 m³ (33 to 58 yd³)
Cab
- Air Conditioning
- Standard air conditioning system contains environmentally friendly R134a refrigerant
- Cab - ROPS/FOPS (1)
- Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.
- Cab - ROPS/FOPS (2)
- SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005
- ROPS
- ROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria.
- FOPS
- FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.
- Sound Performance (1)
- The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
- Sound Performance (2)
- The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A).
- Sound Performance (3)
- Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
- Sound Performance (4)
- The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A).
Steering
- Minimum Turning Radius
- 31 ft
- Total Steering Angle
- 86 °
- Hydraulic Output at 1,850 rpm and 6900 kPa (1,000 psi)
- 124 gal/min
- Relief Valve Setting
- 5004 psi
Model 854K (Tier 4)
- Serial Number Prefix
- KK6
Model 854K (Tier 2)
- Serial Number Prefix
- RM6
Dimensions (Approximate)
- Height - Top of ROPS
- 18.25 ft
- Height - Top of Exhaust Pipe
- 17.17 ft
- Height - Top of Hood
- 13 ft
- Ground Clearance
- 27 in
- Centerline of Front Axle to Hitch
- 9.67 ft
- Centerline of Rear Axle to Edge of Bumper
- 13.75 ft
- Wheel Base
- 19.25 ft
- Length - With Blade on Ground
- 44 ft
Standard Equipment
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Electrical
-
- Alarm, back-up
- Alternator (150-amp)
- Batteries, low maintenance
- Deutsch & Amp Seal terminal connectors
- ECM diagnostic connector
- Ground level electrical disconnect
- Ground level starting receptacle for emergency start
- Lighting system, halogen (front and rear)
- Lighting, access stairway
- Starter, electric (heavy duty)
- Starting and charging system (24-volt)
-
- Operator Environment
-
- Advisor display
- Air conditioner and heater with automatic temperature control
- Cab, sound suppressed, pressurized, rollover protective structure (ROPS/FOPS) Radio ready for (entertainment) includes antenna, speakers, and 1 × 12V converters (24-volt, 10 amp) for use with laptop/cell phone
- Cigar lighter and ashtray
- Coat hook
- Electro-hydraulic tilt and lift control system locks
- Heater and defroster
- Horn, electric
- Implement and steering lockouts
- VIMS 3G monitoring system:
– Action alert system, three category
– Instrumentation, gauges:
· Engine Coolant Temperature
· Fuel Level
· Hydraulic Oil Temperature
· Tachometer
· Transmission Gear Indicator
· Transmission Oil Temperature - Light, dome (cab)
- Lunchbox and beverage holders
- Mirrors, rearview (externally mounted)
- Seat belt, retractable, 76 mm (3 in) wide operator and trainer seats
- Seat, Cat Comfort (cloth) air suspension
- STIC control system
- Tinted glass
- Wet-arm wipers/washer (front, rear, and corners), intermittent front wipers
-
- Power Train
-
- Air-to-Air After cooler (ATAAC)
- Auto Idle Kickdown
- Axle oil coolers (front and rear)
- Brakes, fully hydraulic, enclosed, wet multiple disc service brakes and dry parking/secondary brake
- Case drain filters
- Delayed Engine Shutdown
- Demand fan
- Electric fuel priming pump
- Engine, Cat C32 ACERT
- Ground level engine shutdown
- Ground level fast fill fuel
- Ground level transmission lockout
- Ground level starter lockout
- Idle Engine Shutdown
- Precleaner, engine air intake
- Next Generation Modular Radiator (NGMR)
- Starting aid (ether), automatic
- Throttle lock
- Transmission, 533 mm (21 in) planetary, powershift with 3F/3R, electronic control
- Venturi Exhaust Stacks
-
- Other Standard Equipment
-
- Autolube
- Automatic bucket lift/tilt kickouts, electronically adjustable from cab
- Bumper service center
- Couplings, Cat O-ring face seals
- Doors, service access (locking)
- Emergency platform egress
- Fenders, steel (front and rear)
- Grouped hydraulic pressure ports
- Guards, power train and crankcase
- Hitch, drawbar with pin
- Hoses, Cat XT™ and XT-ES
- Hydraulic oil cooler
- Impeller clutch
- Implement and steering ecology drains
- Mufflers, under hood
- Oil sampling valves
- Piston pump case drain filters
- Electro-hydraulic blade controls
- Product Link™
- Service center with ground level electrical and fluids service center
- Sight gauges:
– Coolant level
– Implement oil level
– Steering oil level
– Transmission oil level - Starter lockout, bumper
- Stairway, left and right rear access
- Steering, load sensing
- Toe kicks
- Transmission lockout, bumper
- Vandalism protection caplocks
- Windshield cleaning platforms
- Venturi Stack
-
- Tires, Rims, And Wheels
-
- A tire must be selected from the mandatory attachments section. Base machine price includes a tire allowance.
-
- Antifreeze
-
- Premixed 50 percent concentration of extended life coolant with freeze protection to –34° C (–29° F)
Attachments
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Blades
-
- Semi-U – 25.4 m³ (33.1 yd³)
- HD Semi-U – 25.4 m³ (33.1 yd³)
- Coal – 44.7 m³ (58.2 yd³)
-
- Electrical
-
- 10A converter
- HID lights
- Object Detection
- Rear vision camera
- LED strobe warning beacons
-
- Operator Environment
-
- AM/FM/CD/MP3 radio
- Cab precleaner
- Sirius/USB/Bluetooth Radio
- Sun Screen
-
- Starting Aids
-
- Engine coolant 120V heater
- Engine coolant 240V heater
-
- Machine Control And Guidance
-
- CAES attachment ready option
-
- Miscellaneous Attachments
-
- Arctic Antifreeze for protection to –50° C (–58° F)
- Diagnostic lines
- Roading fenders