Exterior View
Product Specs
Engine
- Base Power (1st Gear) - Net
- 145 hp
- Engine Model
- Cat® C7.1 ACERT™
- Bore
- 4.13 in
- Stroke
- 5.31 in
- Speed at Rated Power
- 2,100 rpm
- AWD Range - Net
- 114-156 kW (153-209 hp)
- AWD Range - Net - Metric
- 114-156 kW (155-212 hp)
- Base Power (1st Gear) - Net - Metric
- 147 hp
- VHP Plus - Gear 1F, Net
- 145 hp
- VHP Plus - Gear 2F, Net
- 153 hp
- VHP Plus - Gear 3F, Net
- 161 hp
- VHP Plus - Gear 4F, Net
- 169 hp
- VHP Plus - Gear 5F, Net
- 174 hp
- VHP Plus - Gear 6F, Net
- 179 hp
- VHP Plus - Gear 7F, Net
- 184 hp
- VHP Plus - Gear 8F, Net
- 189 hp
- Base Power (All Gears) - Net
- 145 hp
- Emissions
- Tier 4 Interim/Stage IIIB equivalent
- High Ambient - Fan Speed - Standard
- 1,000 rpm
- Maximum Torque
- 693 lb/ft
- Standard Capability
- 109 °F
- Torque Rise
- 45%
- VHP Plus Range - Net
- 108-141 kW (145-189 hp)
- VHP Plus Range - Net - Metric
- 108-141 kW (147-192 hp)
- Displacement
- 428 in³
- Number of Cylinders
- 6
- Derating Altitude
- 10000 ft
- High Ambient - Fan Speed - Maximum
- 1,350 rpm
- High Ambient - Fan Speed - Minimum
- 500 rpm
- High - Ambient Capability
- 122 °F
Weights
- Operating Weight - Typically Equipped
- 41859 lb
- Gross Vehicle Weight - Maximum - Rear Axle
- 33312 lb
- Gross Vehicle Weight - Base - Front Axle
- 9777 lb
- Gross Vehicle Weight - Base - Rear Axle
- 27438 lb
- Gross Vehicle Weight - Maximum - Total
- 48987 lb
- Gross Vehicle Weight - Base - Total
- 37214 lb
- Gross Vehicle Weight - Maximum - Front Axle
- 15675 lb
- Operating Weight - Typically Equipped - Front Axle
- 11614 lb
- Operating Weight - Typically Equipped - Rear Axle
- 30244 lb
- Operating Weight - Typically Equipped - Total
- 41859 lb
Moldboard
- Blade Width
- 12 ft
- Moldboard - Height
- 24 in
- Moldboard - Thickness
- 0.87 in
- Arc Radius
- 16.3 in
- Throat Clearance
- 4.9 in
- Cutting Edge Width
- 6 in
- Cutting Edge Thickness
- 0.6 in
- End Bit - Width
- 6 in
- End Bit - Thickness
- 0.6 in
- Blade Pull - Base GVW
- 23737 lb
- Blade Pull - Maximum GVW
- 44088 lb
- Blade Down Pressure - Base GVW
- 15030 lb
- Blade Down Pressure - Maximum GVW
- 27235 lb
Operating Specifications
- Top Speed - Forward
- 28.4 mile/h
- Top Speed - Reverse
- 22.4 mile/h
- Turning Radius - Outside Front Tires
- 24.3 ft
- Steering Range - Left/Right
- 47.5°
- Articulation Angle - Left/Right
- 20°
- Forward - 1st
- 2.5 mile/h
- Forward - 2nd
- 3.4 mile/h
- Forward - 3rd
- 4.9 mile/h
- Forward - 4th
- 6.7 mile/h
- Forward - 5th
- 10.4 mile/h
- Forward - 6th
- 14.2 mile/h
- Forward - 7th
- 19.5 mile/h
- Forward - 8th
- 28.4 mile/h
- Reverse - 1st
- 1.9 mile/h
- Reverse - 2nd
- 3.9 mile/h
- Reverse - 3rd
- 5.3 mile/h
- Reverse - 4th
- 8.2 mile/h
- Reverse - 5th
- 15.4 mile/h
- Reverse - 6th
- 22.4 mile/h
Service Refill
- Fuel Capacity
- 100 gal (US)
- Cooling System
- 12.9 gal (US)
- Hydraulic System - Tank
- 16.9 gal (US)
- Engine Oil
- 7.9 gal (US)
- Transmission - Differential - Final Drives
- 16.5 gal (US)
- Tandem Housing - Each
- 15.6 gal (US)
- Front Wheel Spindle Bearing Housing
- 0.13 gal (US)
- Circle Drive Housing
- 1.8 gal (US)
Power Train
- Forward/Reverse Gears
- 8 Forward/6 Reverse
- Transmission
- Direct Drive, Powershift
- Brakes - Service
- Multiple Oil Disc
- Brakes - Service - Surface Area
- 3565 in²
- Brakes - Parking
- Multiple Oil Disc
- Brakes - Secondary
- Dual Circuit
Hydraulic System
- Circuit Type
- Parallel
- Pump Type
- Variable Piston
- Pump Output
- 55.7 gal/min
- Maximum System Pressure
- 3500 psi
- Reservoir Tank Capacity
- 15.85 gal (US)
- Standby Pressure
- 609 psi
Frame
- Drawbar - Width
- 3 in
- Circle - Diameter
- 60.2 in
- Circle - Blade Beam Thickness
- 1.4 in
- Drawbar - Height
- 6 in
- Front Frame Structure - Height
- 11 in
- Front Frame Structure - Width
- 8 in
- Drawbar - Thickness
- 0.4 in
- Front-Top/Bottom Plate - Width
- 10 in
- Front-Top/Bottom Plate - Thickness
- 0.87 in
- Front Axle - Height to Center
- 22.5 in
- Front Axle - Wheel Lean - Left/Right
- 18°
- Front Axle - Total Oscillation per Side
- 32°
Blade Range
- Circle Centershift - Right
- 25.8 in
- Circle Centershift - Left
- 25.8 in
- Moldboard Sideshift - Right
- 26 in
- Moldboard Sideshift - Left
- 20.1 in
- Maximum Blade Position Angle
- 90°
- Blade Tip Range - Forward
- 40°
- Blade Tip Range - Backward
- 5°
- Maximum Lift Above Ground
- 16.8 in
- Maximum Depth of Cut
- 28.3 in
- Maximum Shoulder Reach Outside of Tires - Right
- 75 in
- Maximum Shoulder Reach Outside of Tires - Left
- 68.6 in
Standards
- Brakes
- ISO 3450
- ROPS/FOPS
- ISO 3471/ISO 3449
- Sound
- ISO 6394; ISO 6395
- Steering
- ISO 5010
Scarifier
- Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing
- 4.6 in
- Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders
- 5/11
- Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum
- 18.4 in
- Front, V-Type, 5 or 11 Tooth - Working Width
- 40.6 in
- Front, V-Type - Working Width
- 47.4 in
- Mid, Straight - Ripping Depth, Maximum
- 12.5 in
- Mid, Straight - Scarifier Shank Holder Spacing
- 4.4 in
- Mid, Straight - Scarifier Shank Holders
- 17
- Mid, Straight - Scarifying Depth, Maximum
- 16.8 in
- Mid, Straight - Working Width
- 71 in
- Mid, V-Type - Scarifier Shank Holders
- 11
- Mid, V-Type - Scarifier Shank Holder Spacing
- 4.6 in
- Mid, V-Type - Scarifying Depth, Maximum
- 11.5 in
- Mid, V-Type - Working Width
- 46.6 in
Ripper
- Ripping Depth - Maximum
- 8.9 in
- Ripper Shank Holder Spacing
- 21 in
- Ripper Shank Holders
- 5
- Penetration Force
- 17692 lb
- Pry-Out Force
- 5660 lb
- Machine Length Increase, Beam Raised
- 41.5 in
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.88 metric tonnes.
Emissions
- Note
- U.S. EPA Tier 4 Interim/EU Stage IIIB equivalent
Tires
- 17.5 R25 Tire (14x25 Rim) Dimension Adjustments - Height to Dimensions 1, 2, 8, 9, 10
- -0.8 in
- 17.5 R25 Tire (14x25 Rim) Dimension Adjustments - Length Front Tire to Rear of Machine Dimension 6
- -0.6 in
- 17.5 R25 Tire (14x25 Rim) Dimension Adjustments - Width to Tire Centerline Dimension 11
- 4.1 in
- 17.5 R25 Tire (14x25 Rim) Dimension Adjustments - Width to Tire Front/Rear Tires Dimensions 12, 13
- 7.6 in
- Note
- Dimension changes may vary by brand/type and inflation of tires.
Tandems
- Height
- 19.8 in
- Width
- 6.8 in
- Sidewall Thickness - Inner
- 0.5 in
- Sidewall Thickness - Outer
- 0.6 in
- Drive Chain Pitch
- 1.8 in
- Wheel Axle Spacing
- 59.5 in
- Tandem Oscillation - Front Up
- 15°
- Tandem Oscillation - Front Down
- 25°
Standard Equipment
-
- Power Train
-
- Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
- Air-to-air after cooler (ATAAC)
- Belt, serpentine, automatic tensioner
- Brakes, oil disc, four-wheel, hydraulic
- Demand fan, hydraulic, swing-out
- Differential lock/unlock, automatic
- Drain, engine oil, ecology
- Electronic over speed protection
- Engine, C7.1 with ACERT Technology, Tier 4 Interim and Stage IIIB equivalent emission standards
- Fuel tank, 378 L (100 gal), ground level access and sediment drain
- Parking brake – multi-disc, sealed, oil-cooled
- Priming pump, fuel
- Rear axle, modular
- Sediment drain, fuel tank
- Tandem drive
- Transmission, 8F/6R, power shift, direct drive
- VHP Plus (Variable Horsepower)
-
- Electrical
-
- Alarm, back up
- Alternator, 150 ampere, sealed
- Batteries, maintenance free, heavy duty, 1,125 CCA
- Breaker panel, ground accessible
- Cab harness and electrical hydraulic valves
- Electrical system, 24V
- Grade Control Ready – Cab harness, software, electrical hydraulic valves, bosses and brackets
- Lights, roof-mounted roading, reversing, LED stop and tail
- Product Link Ready
- Starter, electric
-
- Operator Environment
-
- Accelerator
- Air conditioning with heater
- Arm and wrist rest, electronically adjustable
- Articulation, automatic Return-to-Center
- Ashtray and lighter
- Cat® Messenger operator information system
- Centershift pin indicator
- Coat hook
- Cup holder
- Display, digital speed and gear
- Doors, left and right side with wiper
- Gauge, machine level
- Gauge cluster (analog) – fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp, regen
- Hour meter, digital
- Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and power steering
- Joystick, adjustable armrests
- Joystick gear selection
- Joystick hydraulic power steering
- Ladders, cab, left and right side
- Lights, night time cab
- Mirror, inside rearview, wide angle
- Power port, 12V
- Radio Ready, Entertainment
- ROPS cab, sound suppressed 70 dB(A)
- Seat, cloth-covered, comfort suspension
- Seat belt, retractable 76 mm (3 in)
- Storage area for cooler/lunchbox
- Throttle control, electronic
- Windows, laminated glass: – fixed front with intermittent wiper – side and rear (3)
-
- Fluids
-
- Antifreeze
- Extended Life Coolant to –35° C (–30° F)
-
- Tires, Rims And Wheels
-
- Partial allowance for tires on 254 × 607 mm (10 × 24 in) multi-piece rims is included in the base machine price and weight
-
- Other Standard Equipment
-
- Accumulators, brake, dual certified
- Anti-glare paint
- Bumper, rear, integrated with hitch
- CD ROM Parts Book
- Clutch, circle drive slip
- Cutting edges: – 152 × 16 mm (6 × 5/8 in) – curved DH-2 steel – 19 mm (3/4 in) mounting bolts
- Doors (3), engine compartment, locking
- Drawbar – 6 shoes, replaceable wear strips
- Electrical hydraulic valves, hydraulic lines for base 8 functions
- Endbits: – 16 mm (5/8 in) DH-2 steel – 19 mm (3/4 in) mounting bolts
- Fluid check, ground level
- Frame, articulated, with safety lock
- Ground level engine shutdown
- Hammer (emergency exit)
- Horn, electric
- Hydraulic lines for base functions
- Lockout, hydraulic implement (for roading and servicing)
- Moldboard – 3658 × 610 × 22 mm (12 ft × 24 in × 7/8 in)
- Mounting, cab roof accessories
- Pump, hydraulic, high capacity, 98 cm³ (6 in³)
- Radiator, cleanout access (both sides with swing doors)
- Secondary steering
- Serviceability, LH side
- SOSSM ports: engine, hydraulic, transmission, coolant, fuel
- Tandem walkway/guards
- Tool box
- Tow hitch
Attachments
-
- Electrical
-
- Alternator, 280 ampere
- Batteries: extreme duty, 1,400 CCA
- Converter, communication (CB)
- Lights: Headlights, high
- Lights: Headlights, low
- Lights: Working lights, basic
- Lights: Working lights, plus, LED
- Lights: Warning: beacon or strobe
- Lights: Mounting for warning light
-
- Guards
-
- Fenders, front
- Fenders, rear
- Sound suppression (bottom)
- Sound suppression (enclosure)
- Transmission
-
- Operator Environment
-
- Fan, defroster, rear window
- Mirrors, outside: heated 24V
- Mirrors, outside: mounted
- Precleaner, HVAC
- Radio ready, AM/FM
- Seat, air suspension, cloth
- Shade, sun
- Wiper/washer, rear
-
- Power Train
-
- All Wheel Drive
- Fuel tank, fast fill
- Oil, hydraulic, biodegradable synthetic
- Precleaner, snow
- Starter, heavy duty, 1,000 Amp
- Transmission, autoshift
-
- Other Attachments
-
- AccuGrade ARO
- Accumulators, blade lift
- Camera, rearview
- Cat Product Link 321SR
- Drain, ecology, engine Wiggins
- Fenders, front, AWD
- Fenders, rear
- Heater, engine coolant: 120V
- Heater, engine coolant: 240V
- Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, dozer, snow plow and snow wing.
- Snow wing mounting, frame ready
- Sound suppression
- Starting aid, ether
-
- Work Tools/g.e.t.
-
- Blade extension, left hand, 610 mm (2 ft)
- Cutting edges, curved
- Endbits, overlay
- Front lift group, mounting
- Front lift group, mechanical
- Grader bit, narrow and super penetration
- Mid-Mount Scarifier, Package
- Mid-Mount Scarifier, Mounting
- Moldboard: 4267 mm × 610 mm × 22 mm (14 ft × 24 in × 7/8 in)
- Moldboard: 4267 mm × 686 mm × 25 mm (14 ft × 27 in × 1 in)
- Push plate, counterweight
- Ripper, mounting
- Ripper, rear
- Ripper tooth
- Scarifier, front
- Snow Arrangement
- Snow Wing Ready Package
-
- Machine Arrangements
-
- Canadian Arrangement
- European Arrangement
- European Roading Arrangement