Exterior View
Product Specs
Engine
- Engine Model
- Cat C7.1
- Net Power - ISO 9249
- 202 hp
- Net Power - ISO 9249 (DIN)
- 205 hp (metric)
- Engine Power - ISO 14396:2002
- 201 hp
- Engine Power - ISO 14396 (DIN)
- 204 hp (metric)
- Bore
- 4 in
- Stroke
- 5 in
- Displacement
- 428 in³
- Biodiesel Capability
- Up to B20¹
- Emissions
- Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
- Note (1)
- Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time
- Note (2)
- ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO
Weights
- Operating Weight
- 85310 lb
- Note
- Operating weight includes full fuel tank, 75 kg (165 lb) operator, grapple 2000 kg (4,410 lb) and single tires. Weight varies depending on configuration.
Working Ranges
- Maximum Reach
- 50.8 ft
- Boom
- MH 9.3 m (30'6")
- Stick
- Industrial 7.1 m (23'3")
- Maximum Height
- 57.4 ft
- Maximum Dump Height
- 17.9 ft
- Maximum Depth
- 17.3 ft
- Boom Pin Height
- 40 ft
Transmission
- Maximum Travel Speed
- 11.2 mile/h
- Drawbar Pull
- 34621 lbf
- Maximum Gradeability
- 44%
Hydraulic System
- Maximum Pressure - Implements
- 5076 psi
- Maximum Pressure - Swing
- 4061 psi
- Maximum Pressure - Travel
- 5076 psi
Swing Mechanism
- Swing Speed
- 7 r/min
- Maximum Swing Torque
- 60628 lbf·ft
Service Refill Capacities
- Fuel Tank Capacity
- 125.2 gal (US)
- Cooling System
- 6.6 gal (US)
- Engine Oil
- 6.6 gal (US)
- Rear Axle - Housing (Differential)
- 9 gal (US)
- Final Drive
- 2 gal (US)
- Powershift Transmission
- 0.8 gal (US)
- Hydraulic System - Including Tank
- 86.9 gal (US)
- Hydraulic Tank
- 38.8 gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 10.8 gal (US)
Dimensions
- Boom
- MH 9.3 m (30'6")
- Stick
- Industrial 7.1 m (23'3")
- Shipping Length
- 42 ft
- Machine Length
- 20.8 ft
- Tail Swing Radius
- 10.3 ft
- Counterweight Clearance
- 5.7 ft
- Cab Height- Lowered
- 12 ft
- Cab Height-Lowered with OPG
- 12.5 ft
- Cab Height-Raised
- 20.5 ft
- Cab Height-Raised with OPG
- 21 ft
- Wheel Base
- 10.5 ft
- Shipping Width
- 9.8 ft
- Ground Clearance
- 0.9 ft
- Undercarriage Length
- 20.4 ft
Air Conditioning System
- Note (1)
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.2 kg (2.6 lb) of refrigerant which has a CO2 equivalent of 1.716 metric tonnes (1.891 tons).
Sustainability
- Recyclability
- 95%
Standard Equipment
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Cab
-
- Advanced sound suppressed Tip Over Protective Structure (TOPS) certified cab with rubber mounts
- High-resolution 254 mm (10") LCD touch screen monitor
- Automatic bi-level air conditioner
- Jog dial and shortcut keys for monitor control
- Keyless push-to-start engine control
- Tilt-up left-side console
- Heated seat with air suspension (Deluxe cab)
- Heated and ventilated seat with air suspension (Premium cab)
-
- Cat Technology
-
- VisionLink®
- Remote Flash and Remote Troubleshoot
- Cat Payload
-
- Electrical System
-
- Maintenance-free battery
- LED chassis light, left-hand/right-hand boom lights, cab lights - 1800 lumens
- Centralized electrical disconnect switch
- Programmable time delay LED working lights after engine shutdown
-
- Engine
-
- Cat C7.1 diesel engine
- Three selectable modes: Power, Smart, Eco
- Up to 4500 m (14,760 ft) altitude capability with engine power derate above 3000 m (9,840 ft)
- Cold start capability -18°C (0°F)
- Reversible electric cooling fans
- Cold start, ether start (N Am and Aus-NZ only)
-
- Hydraulic System
-
- Boom and stick lowering control check valves
- Boom and stick regeneration circuits
- Electronic main control valve
- Automatic hydraulic oil warm up
- Heavy lift mode
-
- Safety And Security
-
- Rear and right-hand-sideview cameras
- Caterpillar One Key Security System
- Travel alarm
- Ground-level accessible secondary engine shutoff switch in cab
- Signal/warning horn
- 2D E-fence
- Cab Avoidance
- Swing Assist
- Rear window emergency exit
-
- Service And Maintenance
-
- Grouped location for engine oil and fuel filters
- Scheduled Oil Sampling (S·O·S℠) ports
- Automatic lubrication system for implement and swing system
-
- Undercarriage And Structures
-
- All wheel drive
- Automatic brake/axle lock
- Creeper speed
- Electronic swing and travel lock
- Heavy-duty axles, advanced disc brake system, and travel motor with adjustable braking force
- Lockable, oscillating front axle with remote greasing point
- Two speed hydrostatic transmission
- Counterweight 7700 kg (16,975 lb)
Attachments
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Boom And Sticks
-
- 10.4 m (34'9") Material Handler boom
- 9.3 m (30'6") Material Handler boom
- 9.9 m (32' 6") Barge boom
- 6.8 m (22'4") Log Loader boom (N Am only)
- 7.5 m (24'7") Industrial stick
- 7.1 m (23'3") Industrial stick
- 5.7 m (18'8") Industrial stick
- 6.4 m (21'0") Straight stick
- 4.1 m (13'3") Over/Under Log Loader stick (N Am only)
-
- Cab
-
- Fixed one-piece front window and skylight (P5A classified)
- Fixed two-piece front window and skylight (P8B classified)
- Operator Protective Guards (OPG)
-
- Electrical System
-
- Generator, 20 kW with wiring to stick nose
-
- Engine
-
- Cold start, block heater (N Am only)
-
- Safety And Security
-
- 360° visibility
-
- Undercarriage And Structures
-
- 16.00-25 single solid rubber tires
- 23.5-R25 single pneumatic tires
- 12.00-20 dual solid rubber tires
- Hitch towing