Product Specs
Engine
- Maximum Gross Power
- 188 hp
- Maximum Gross Power
- 188 HP
- Bore
- 4 in
- Bore
- 4 in
- Stroke
- 5 in
- Stroke
- 5 in
- Displacement
- 427 in3
- Displacement
- 427 in³
- Engine Model
- Cat® C7.1 ACERT™
- Maximum Rated Gross Power - ISO 14396
- 188 HP
- Maximum Rated Gross Power - ISO 14396 (DIN)
- 188 HP
- Maximum Rated Gross Power – Maximum Engine Speed (Performance [HP+] Power Mode: Range 1-4)
- 1800 rpm
- Maximum Rated Gross Power – ISO 14396 (Performance [HP+] Power Mode: Range 1-4)
- 188 hp
- Maximum Rated Gross Power – ISO 14396 (DIN) (Performance [HP+] Power Mode: Range 1-4)
- 190 hp
- Rated Net Power at 1,800 rpm – SAE J1349 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
- 182 hp
- Rated Net Power at 1,800 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
- 184 hp
- Rated Net Power at 1,800 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
- 186 hp
- Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
- 664 ft·lbf
- Maximum Net Torque – SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
- 621 lbf-ft
- Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Performance [HP+] Power Mode: Range 1-4)
- 628 lbf-ft
- Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
- 1600 r/min
- Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
- 173 HP
- Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
- 175 HP
- Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
- 168 HP
- Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
- 169 HP
- Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
- 171 HP
- Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
- 642 ft·lbf
- Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
- 627 ft·lbf
- Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
- 628 ft·lbf
- Emissions
- Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
- Note
- *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
- Note
- Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
- Note
- No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
- Note
- Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
- Engine Model
- Cat® C7.1
- Maximum Rated Gross Power - ISO 14396 (DIN) (Performance [HP+] Power Mode: Range 1-4)
- 188 HP
- Maximum Rated Gross Power - ISO 14396 (Performance [HP+] Power Mode: Range 1-4)
- 188 HP
- Maximum Rated Gross Power - Maximum Engine Speed (Performance [HP+] Power Mode: Range 1-4)
- 1800 r/min
- Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
- 184 HP
- Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
- 182 HP
- Emissions
- The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards.
- Maximum Gross Torque - ISO 14396 (Performance [HP+] Power Mode: Range 1-4)
- 648 ft·lbf
- Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance [HP+] Power Mode: Range 1-4)
- 628 ft·lbf
- Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
- 649 ft·lbf
- Note (1)
- *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
- Note (2)
- Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
- Note (3)
- No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
- Note (4)
- Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
- Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance [HP+] Power Mode: Range 1-4)
- 186 HP
- Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
- 1800 r/min
- Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
- 1600 r/min
- Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
- 173 HP
- Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
- 188 HP
- Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)
- 650 ft·lbf
- Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)
- 628 ft·lbf
- Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
- 186 HP
- Engine Power - ISO 14396
- 188 HP
- Engine Power - ISO 14396 - Metric
- 190 HP
- Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4)
- 190 HP
- Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
- 184 HP
- Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
- 183 HP
- Net Power (Standard Power Mode: Range 1-3*)
- 1600 r/min
- Net Power (Performance Power Mode: Range 1-4)
- 1800 r/min
- Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*)
- 176 HP
- Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
- 170 HP
- Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
- 170 HP
- Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
- 172 HP
Weights
- Operating Weight
- 38555 lb
- Operating Weight
- 41794 lb
- Operating Weight (1)
- 17 258 kg (38,046 lb)**
- Operating Weight (2)
- 18 958 kg (41,794 lb)^
- Note (2)
- ^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.
- Note (1)
- **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.
Buckets
- Bucket Capacities
- 3.0-5.0 m3 (3.9-6.5 yd3)
- Bucket Capacities
- 3.0-5.0 m3 (3.9-6.5 yd3)
Cab
- ROPS
- ISO 3471: 2008
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449: 2005 LEVEL II
- FOPS
- ISO 3449:2005 LEVEL II
- Declared Sound Levels – Operator Sound Pressure Level (ISO 6396:2008)*
- 68 dB(A)
- Declared Sound Levels – Exterior Sound Power Level (ISO 6395:2008)*
- 101 dB(A)
- Note
- *Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows clo
- Note
- The Blue Angel environmental label is an optional attachment for Europe only.
- Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
- 101 dB(A)
- Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
- 68 dB(A)
- Note (1)
- * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows cl
- Note (2)
- The Blue Angel environmental label is an optional attachment for Europe only.
Steering
- Steering Cylinder: Double Acting – Bore Diameter
- 3.1 in
- Steering Cylinder: Double Acting – Rod Diameter
- 2 in
- Steering Cylinder: Double Acting – Stroke
- 15.7 in
- Maximum Flow – Steering Pump
- 34 gal/min
- Maximum Working Pressure – Steering Pump
- 3500 psi
- Maximum Steering Torque – 0° (Straight Machine)
- 42506 lbf-ft
- Maximum Steering Torque - 40° (Full Turn)
- 31398 ft·lbf
- Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
- 3.1 s
- Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
- 2.3 s
- Note
- Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
- Note
- Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
- Maximum Flow - Steering Pump
- 34 gal/min
- Maximum Steering Torque - 0° (Straight Machine)
- 42506 ft·lbf
- Maximum Working Pressure - Steering Pump
- 3500 psi
- Note (1)
- Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
- Note (2)
- Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
- Steering Cylinder, Double Acting - Bore Diameter
- 3.1 in
- Steering Cylinder, Double Acting - Rod Diameter
- 2 in
- Steering Cylinder, Double Acting - Stroke
- 15.7 in
Loader Hydraulic System
- Maximum Flow – Implement Pump
- 50 gal/min
- Maximum Flow - Implement Pump - 3rd Function*
- 50 gal/min
- Maximum Working Pressure – Implement Pump
- 4061 psi
- Relief Pressure – Tilt Cylinder
- 4351 psi
- Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
- 4061 psi
- Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
- 4351 psi
- Lift Cylinder: Double Acting – Bore Diameter
- 4.7 in
- Lift Cylinder: Double Acting – Rod Diameter
- 2.6 in
- Lift Cylinder: Double Acting – Stroke
- 31.1 in
- Tilt Cylinder: Double Acting – Bore Diameter
- 5.9 in
- Tilt Cylinder: Double Acting – Rod Diameter
- 3.5 in
- Tilt Cylinder: Double Acting – Stroke
- 21.9 in
- Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
- 5.5/6.2 seconds
- Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
- 1.5/1.7 seconds
- Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
- 2.7/2.7 seconds
- Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
- 9.7/10.6 seconds
- Note (1)
- Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
- Note
- Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
- Note
- *3rd function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.
- Lift Cylinder, Double Acting - Bore Diameter
- 4.7 in
- Lift Cylinder, Double Acting - Rod Diameter
- 2.6 in
- Lift Cylinder, Double Acting - Stroke
- 31.1 in
- Maximum Flow - Implement Pump
- 50 gal/min
- Maximum Working Pressure - Implement Pump
- 4061 psi
- Note (2)
- Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
- Note (3)
- * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.
- Relief Pressure - Tilt Cylinder
- 4351 psi
- Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
- 4061 psi
- Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure
- 4351 psi
- Tilt Cylinder, Double Acting - Bore Diameter
- 5.9 in
- Tilt Cylinder, Double Acting - Rod Diameter
- 3.5 in
- Tilt Cylinder, Double Acting - Stroke
- 21.9 in
- Maximum Flow - Implement Pump - 4th Function Maximum Flow*
- 42 gal/min
- Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
- 50 gal/min
- Lift Cylinder: Standard Lift Linkage - Stroke
- 31.1 in
- Tilt Cylinder: Standard Lift Linkage - Rod Diameter
- 3.5 in
- Lift Cylinder: Standard Lift Linkage - Rod Diameter
- 2.6 in
- Tilt Cylinder: Standard Lift Linkage - Bore Diameter
- 5.9 in
- Lift Cylinder: Standard Lift Linkage - Bore Diameter
- 4.7 in
- Tilt Cylinder: Standard Lift Linkage - Stroke
- 21.9 in
Service Refill Capacities
- Fuel Tank
- 51.5 gal
- Diesel Exhaust Fluid (DEF) Tank
- 5.0 gal
- Cooling System
- 8.5 gal
- Engine Crankcase
- 5.3 gal
- Transmission (Gear Box)
- 2.9 gal
- Front Axles
- 9.2 gal (US)
- Rear Axles
- 9.2 gal (US)
- Hydraulic System (Including Tank)
- 44.9 gal
- Hydraulic Tank
- 23.8 gal
- Cooling System
- 8.5 gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 5 gal (US)
- Engine Crankcase
- 5.3 gal (US)
- Fuel Tank
- 51.5 gal (US)
- Hydraulic System - Including Tank
- 44.9 gal (US)
- Hydraulic Tank
- 23.8 gal (US)
- Transmission - Gear Box
- 2.9 gal (US)
- Axles - Rear
- 9.2 gal (US)
- Axles - Front
- 9.2 gal (US)
Transmission
- Forward and Reverse - Range 1*
- 1-13 km/h (0.6-8 mph)
- Forward and Reverse - Range 2
- 8 mile/h
- Forward and Reverse - Range 3
- 17 mile/h
- Forward and Reverse - Range 4
- 25 mile/h
- Note
- *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).
- Note
- *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).
Operating Specifications
- Full Turn Tip Load
- 21720 lb
- Full Turn Tip Load
- 21720 lb
- Note (1)
- **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.
- Full Turn Tip Load (1)
- 9795 kg (21,594 lb)**
- Note (2)
- ^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.
- Full Turn Tip Load (2)
- 10 741 kg (23,679 lb)^
Power Train
- Front Axle
- Fixed
- Front Axle: Traction Aid*
- Locking differential (standard)
- Rear Axle
- Oscillating
- Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
- ± 10.5 degrees
- Rear Axle - Oscillation Angle by Tire Size - 23.5 R25
- ± 7 degrees
- Rear Axle - Traction Aid - Optional
- Limited slip differential
- Brakes: Service
- Outboard wet disc
- Brakes: Park
- Spring applied hydraulically released
- Note
- Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
- Note
- Offset rims available to meet European roading requirements.
- Note
- *Differential front locking axle can be engaged on the go at full torque to 20 km/h (12.4 mph) on the 938M.
- Brakes - Parking
- Spring applied hydraulically released
- Brakes - Service
- Inboard wet disc
- Front Axle
- Fixed
- Front Axle - Traction Aid*
- Locking differential (standard)
- Note (1)
- Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
- Note (2)
- Offset rims available to meet European roading requirements.
- Note (3)
- Differential front locking axle can be engaged on the go at full torque up to 20 km/h (12.4 mph) on the 938M.
- Rear Axle
- Oscillating
- Front Axle - Traction Aid
- Locking differential
- Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder
- ± 7 degrees
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Standard Equipment
-
- Power Train
-
- Axle Duo-Cone™ seal guards
- Auto idle shut down feature
- Cat C7.1 engine
– Power modes (Standard and Performance)
– Power by range (High Power in Range 4)
– Turbocharged and aftercooled
– Diesel particulate filter (Fit for Life) - Coded start (requires secondary display)
- Differential lock in front axle
- Enclosed wet disc full hydraulic brakes
- Hydraulically driven demand cooling fan
- Hydrostatic transmission with electronic control
– Operator modes (Default, TC, Hystat, and Ice)
– Directional Shift Aggressiveness (fast, medium, slow)
– Rimpull control, adjust wheel torque
– Creeper control, adjust ground speed - Parking brake, electric
- Single plane cooling package wide six fins per inch density
- Oil sampling ports
- Throttle lock and max speed limiter
-
- Hydraulics
-
- Automatic lift lower and tilt kickouts, adjustable in-cab
- Bucket and fork modes, adjustable in-cab
- Cylinder damping at kickout and mechanical end stops
- Fine mode control (fast, medium, slow)
- Hydraulic response setting (fast, medium, slow)
- Load sensing hydraulics and steering
- Seat-mounted hydraulic joystick controls
-
- Electrical
-
- Alternator, 115 amp, heavy duty
- Batteries, 1,000 CCA (2) 24V system, disconnect switch
- Back-up alarm
- Emergency shutdown switch
- Halogen work and roading lights, LED rear tail lights
- Product Link PRO with three year subscription
- Remote jump start post
- Resettable main and critical function breakers
-
- Operator Environment
-
- 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
- Automatic temperature control
- Cab, pressurized
- Camera, rearview
- External heated mirrors with lower parabolic
- Ground level cab door release
- Hydraulic control lockout
- Mirror, single
- Lunch box storage
- Radio ready speakers
- Rear window defrost, electric
- Column mounted multi function control – lights, wipers, turn signal
- Tilt and telescopic steering wheel
- Tinted front glass
- Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
- Suspension seat, fabric
-
- Other Standard Equipment
-
- Large-access enclosure doors with adjustable close/open force
- Cat optimized Z-bar linkage with parallel lift
- Recovery hitch, with pin
- Remote mounted lubrication points
- Lockable compartments and enclosures
Attachments
-
- Optional Equipment
-
- Autolube, integrated in secondary display
- Auxiliary flow, third and fourth function
- Differential, limited slip, rear
- Beacon light, strobe
- Cab, deluxe (standard in Europe)
– Camera, rearview integrated into advanced display
– Electrically adjustable external heated mirrors (2)
– Secondary display to enable features and adjust parameters
– LED interior lighting
– Sunscreen, front and rear
– Touchscreen secondary display
– Ride control adjustable speed activation
– Preventative maintenance reminders
– Integrated help function (26 languages) - Camera, roof mounted, front view with separate display
- Cold start package
– Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total) - Counterweight, additional options
- Coupler, (Fusion and ISO 23727)
- Debris packages (low, medium, high)
- Fenders (extended cover and full coverage)
- Guarding packages
- Linkage, high lift
- Lights, auxiliary, halogen or LED with engine and DEF compartment lights
- Payload Technology
– Cat Production Measurement (CPM)
– CPM Printer - Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
- Radio packages
- Rear Object Detection
- Ride Control System, adjustable through secondary display
- Seats
– Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
– Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest. - Steering
– Dual mode and secondary - Tire Pressure Monitoring (TPM)