Product Specs
Power Rating
- Minimum Rating
- 1251 BHP
- Maximum Rating
- 1910 BHP
Engine Specifications
- Aspiration
- TA
- Bore
- 7.5 in
- Configuration
- Vee 12 4-Stroke-Cycle Diesel
- Displacement
- 3158 in³
- Stroke
- 190 in
Dimensions & Weights
- Maximum Dry Weight
- 15345 lb
- Maximum Height
- 81.7 in
- Maximum Length
- 120 in
- Maximum Width
- 78.3 in
- Minimum Dry Weight
- 14250 lb
- Minimum Height
- 80.8 in
- Minimum Length
- 114 in
- Minimum Width
- 67.1 in
Standard Equipment
-
- Air Inlet System
-
- Separate Circuit aftercooler core, corrosion resistant coated (air side)
- Air cleaner, regular duty
- Dual Turbochargers, 152 mm (6 in) OD straight connection
-
- Control System
-
- Caterpillar A-III Electronic Engine Control, LH with Electronic Unit Injector Fuel System
- Rigid Wiring Harness
-
- Cooling System
-
- Oil cooler
- Thermostats and housing, full open temperature 92 C (198 F)
- Jacket water pump, gear driven, centrifugal
- Auxiliary fresh water pump
- Expansion tank
- Auxiliary sea water pump, centrifugal, non-self-priming
-
- Exhaust System
-
- Dry gas tight exhaust manifolds with heat shields
- Dual Turbochargers with watercooled bearings and heat shields
- Exhaust outlet, vertical, 305 mm (12 in) round flanged outlet on engines @ 1500 or 1800 rpm
- Exhaust outlet, vertical, 203 mm (8 in) round flanged outlet on engines @ 1200 or 1000 rpm
-
- Flywheels & Flywheel Housings
-
- Flywheel, SAE No. 00, 183 teeth
- Flywheel housing, SAE No. 00
-
- Fuel System
-
- Fuel filter, RH, with service indicators
- Fuel transfer pump
- Electronically Controlled Unit Injectors
-
- Instrumentation
-
- Overspeed shutdown notification light
- Emergency stop notification light
- Graphical Unit (Marine Power Display) for analog or digital display of:
-
- Lube System
-
- Crankcase breather, Top mounted
- Oil filter, RH
- Oil filler and dipstick, RH
- 500 hours sump oil pan
- Oil pump, gear type
-
- Mounting System
-
- Rails, engine mounting, engine length, industrial type, 254 mm (10 in), C-channel
-
- Power Take-offs
-
- Accessory drive
- Lower RH, Lower LH
- Front housing, Two-sided
-
- Protection System
-
- A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
- Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection:
-
- General
-
- Vibration damper and guard
- Paint, Caterpillar Yellow engine with black rails.
- Lifting eyes
- NOTE: 1. Engines for heat exchanger cooling do NOT include heat exchanger. 2. When used with competitive generator, a TVA is recommended. An alternative vibration damper may be required. 3. Engine is wired for auto start stop
Attachments
-
- Charging System
-
- Battery Chargers
- Charging Alternators
-
- Control System
-
- Caterpillar A-III Electronic Engine Control, LH with Electronic Unit Injector Fuel System
- Rigid Wiring Harness (10 amp DC power required to drive Electronic Engine Control Module)
-
- Fuel System
-
- Fuel Cooler
- Fuel priming pumps (LH and RH)
- Flexible fuel lines
- Rigid Fuel Lines
- Primary fuel filter
- LH Fuel Filter
- Duplex fuel filters
- Fuel level switch
-
- Generators And Generator Attachments
-
- 1500 / 1800 RPM
- 1000 / 1200 RPM
- Low voltage connection
- Generator conversion
- Low voltage extension box
- RFI filter
- Bearing temperature detectors (RTD)
- Manual voltage control
- Air filter
-
- Instrumentation
-
- PL1000T Communication Module
- Customer Interface Box
- Thermocouples
- Remote panel display
- Remote cylinder temperature display
-
- Lube System
-
- Deep Sump Oil Pan
- Oil Pan Drain Valve
- Oil Pan Drain Cover
- Emergency Lube Oil Connections
- Sump pumps
- Oil filters
- Lubricating oil
- Lube system
-
- Mounting System
-
- Rails
-
- Power Take-offs
-
- Flywheel Guard
- Flexible Coupling
- Coupling Hub
- Upper Left Hand Front Location
- Upper Left Hand Rear Location
- Upper Right Hand Front Location
- Upper Right Hand Rear Location
- Lower Left Hand Front Location
- Lower Left Hand Rear Location
- Front Housing Accessory Drives
- Upper LH Accessory Drive
- Upper RH Accessory Drive
- Front Power Take-offs
- Crankshaft Pulleys
- Damper Guard Removals
-
- Marine Society Requirements
-
- Spray Shielding
-
- Protection System
-
- Air inlet shutoffs
- Switches and contactors
- Explosion relief valve
- Oil Temp Sensor
- Intake Manifold Temp Sensor
-
- Special Appearance
-
- Special appearance packages with chrome covers
- Chrome plated relief valves
- Black air cleaners
- Yacht Class Finish
-
- Starting System
-
- Starting motors or barring divice
- Air starting motors options
- Starting aids
- Battery sets - 24 volt - Dry
-
- General
-
- Tool set
- Caterpillar datalink wire
-
- Svce Tools/ship Prot/factory Support
-
- FACTORY COMMISSIONING
-
- Packing
-
- Shrink wrap protection
- Shrink wrap protection - generator
- Storage preservation with glycol solution/vapor corrosion inhibitor
- Storage preservation with vapor corrosion inhibitor
- Export packaging
- AID emblem
-
- Exhaust System
-
- Horizontal Exhaust
- Flexible fittings
- Elbows
- Flanges
- Flange and exhaust expanders
- Mufflers
-
- Air Inlet System
-
- Remote Air Inlet Adapters
-
- Cooling System
-
- Water level switch gauge
- Coolant level sensors
- Connections
- Radiator cooling conversion
- Keel Cooling Conversions
- Heat exchangers
- Auxiliary water pumps
- Sea water pump removal
- Air separator