Product Specs
Generator Set Specifications
- Continuous Rating
- 9830 / 10300 ekW @ 0.8 pf
- Fuel Type
- Natural Gas
- Maximum Electrical Efficiency
- 48.9%
- Frequency
- 50 / 60 Hz
- RPM
- 750/720
- Frequency
- 50/60 Hz
Engine Specifications
- Engine Model
- G20CM34
- Displacement
- 46484.2 in³
- Aspiration
- Turbocharged and Aftercooled
- Bore
- 13.38 in
- Stroke
- 16.53 in
Generator Set Dimensions
- Length
- 562.2 in
- Width
- 153.9 in
- Height
- 212.2 in
- Dry Weight - Genset
- 361559 lb
Standard Equipment
-
- Safety
-
- Crankcase ventilation
- Oil mist detector
-
- Fuel System
-
- Gas valve unit (GVU)
-
- Combined Module
-
- Cooling water- and lubricating oil system partly on a common base frame with standardized pipe interface. (Cooling water system requires additional cooling towers, radiators or similar)
-
- Intake Air
-
- Systems that can be adjusted to suit the ambient conditions are available, such as pocket filters, oil bath filters or pulse filters
-
- Starting Air
-
- Starting air compressor module
- Starting air receiver module
-
- Exhaust Gas
-
- Exhaust gas ventilation module
- Exhaust gas silencer
- Further elements, such as SCR and oxidation catalyst, are available as options
-
- Control & Monitoring System
-
- Provides the control, monitoring and protection functions of the engine, generator and engine support modules through:
- Local Control Panel (LCP) (recommended) or
- Local Data Panel (LDP) and Generator Control Panel (GCP)
- Provides the control of the engine support modules through Motor Control Center (MCC)
- Asset Intelligence System: Your remote diagnostic system, worldwide
- Provides the control, monitoring and protection functions of the engine, generator and engine support modules through:
-
- Vibration Damping
-
- Optimum oscillation and vibration damping systems for safe and operationally reliable set-up of the plant, especially adjusted to suit your ambient conditions.
- Engine and generator can be supplied as a unit on a common base frame