Product Specs
Engine Specifications
- Maximum Rating
- 2750 BHP
- Rated Speed
- 1000 rpm
- Emissions
- Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx
- Minimum Rating
- 2500 BHP
- Length
- 199.62 in
- Compression Ratio
- Gen 1 (9.2:1) Gen 2 (7:6:1)
- Width
- 2188.8 mm
- Aspiration
- Turbocharged-Aftercooled
- Rotation from Flywheel End
- Counterclockwise
- Height
- 116.18 in
- Displacement
- 10350 in³
- Flywheel Teeth
- 255
- Oil Change Interval
- 5000 hours
- Ignition, Protection
- ADEM™4
- Stroke
- 11.8 in
- Weight - Dry
- 46500 lb
- Bore
- 11.8 in
Capacity for Liquids
- Cooling System
- 140 gal (US)
- Lube Oil System - Refill
- 241 gal (US)
Standard Equipment
- 
            
            - Air Inlet System
- 
                        - Air Cleaner
- Air Inlet Adapter
 
 
- 
            
            - Control System
- 
                        - ADEM 4
 
 
- 
            
            - Cooling System
- 
                        - ANSI Class 150 4 inch Flange (outlet water connection)
- ANSI Class 150 6 inch Flange (Inlet Water connection)
- Engine driven water pump
- Water Jacket Outlet Regulator 88° C
 
 
- 
            
            - Engine System
- 
                        - Engine rating and speed selection
 
 
- 
            
            - Exhaust System
- 
                        - Hard heat shielded exhaust manifolds. SAE Standard
- Vertical Exhaust Outlet
 
 
- 
            
            - Flywheel And Flywheel Housing
- 
                        - Flywheel SAE Standard
 
 
- 
            
            - Fuel System
- 
                        - ANSI Class 150 2 inch Flange (Customer Connection)
- Fuel Filter
- Gas Pressure regulator
 
 
- 
            
            - General
- 
                        - Paint
 
 
- 
            
            - Instrumentation
- 
                        - Basic HMI Engine Interface
 
 
- 
            
            - Lube System
- 
                        - Breathers
- Closed Crankcase ventilation system
- Engine driven oil pump
- Front and Rear Oil Drains
- Oil filter
- Oil Pan
- Oil Supply line
- Pre-lubrication Pump
- Temperature regulated oil cooler
 
 
- 
            
            - Mounting System
- 
                        - Six mounting feet
 
 
- 
            
            - Mountin System
- 
                        - Two Lifting eyes
 
 
- 
            
            - Power Take-offs
- 
                        - Damper guard, Stub Shaft
- Single Damper
 
 
- 
            
            - Protection System
- 
                        - Crankcase explosion relief valve
 
 
- 
            
            - Starting System
- 
                        - Air starting motor
- Engine Barring Device
 
 
- 
            
            - Telematic System
- 
                        - Cat Connect Technology
 
 
Attachments
- 
            
            - Air Inlet System
- 
                        - Heavy-duty air cleaner — with precleaners
 
 
- 
            
            - Control System
- 
                        - Software Development
 
 
- 
            
            - Exhaust System
- 
                        - Exhaust Expander
- Flex EXH Fitting
- Weld Flange EXH
 
 
- 
            
            - Fuel System
- 
                        - Fuel Connection
 
 
- 
            
            - General
- 
                        - Language Decals
- Service Tools
 
 
- 
            
            - Lube System
- 
                        - Lubricating Oil
- Oil Level regulator
 
 
- 
            
            - Mounting System
- 
                        - Six mounting plates
 
 
- 
            
            - Telematic System
- 
                        - Cell - Satellite Radio
- Interconnect Harness
- LAN Adapter
- Product Link Harness
 
 


 Exterior View
 
                        		                        		Exterior View	                        		
                        	