Product Specs
General
- Bore
- 170 mm (6.7 in)
- Stroke
- 190 mm (7.5 in)
- Displacement
- 69 L (4211 in³)
- Aspiration
- Naturally Aspirated (NA), Turbocharged Aftercooled (TA)
- Engine Configuration
- Engine - Continuous
Power Rating
- Minimum Power
- 660 hp
- Maximum Power
- 1380 hp
- Frequency
- 1200-1400 rpm
Engine Dimensions - Approximate
- Height
- 2286 mm (90 in)
- Length
- 3400 mm (133 in)
- Width
- 1844 mm (73 in)
- Weight - Net Dry
- 8401 kg (18520 lb)
Standard Equipment
-
- Air Inlet System
-
- Axial flow air cleaners
- Service indicator
- Cleanable
-
- Cooling System
-
- Two-stage charge air cooling:
- Engine cooling and charge air cooling thermostats
-
- Exhaust System
-
- Dry exhaust manifolds and turbocharger housings
-
- Flywheels And Housings
-
- SAE 00 flywheel
- SAE 00 flywheel housing
- SAE standard rotation
-
- Fuel System
-
- Electronic fuel metering valve
- Requires 7-50 psig gas supply
- Gas pressure regulator
- Gas shutoff valve
-
- Instrumentation
-
- Remote-mounted Advisor control panel
- Interconnect harness
-
- Lube System
-
- Top-mounted crankcase breathers
- Oil cooler
- Oil filter and oil sampling valve
- Drain valve
- Turbo oil accumulator
- API B16.3 approved gas/air-driven pre-lube system
-
- Torsional Vibration Analysis
-
- Caterpillar provided
-
- Mounting
-
- Rails
-
- Control Panels
-
- 4" LCD Advisor display panel
- Shipped loose
-
- Starting System
-
- 90 psi TDI starter
- 150 psi TDI starter
-
- Power Take-offs
-
- Front housing, two sided
- Front lower LH accessory drive
-
- Protection System — Display/alarm/shutdown
-
- Low oil pressure
- Oil filter differential pressure
- High fuel or oil temperature
- Engine oil to engine coolant
- Differential temperature
- High coolant temperature
- Engine speed
- Engine load
- Battery voltage
- Detonation
- Manifold air temperature
- Coolant JW inlet/outlet pressure
- Left turbo inlet temperature
- Right turbo inlet temperature
- Cylinder port temperature
-
- Protection System — Display Only
-
- Service hours
- Oxygen level
-
- General
-
- Paint — Cat yellow
- Dual 23" vibration damper with guard
- CSA Certification, Class 1 Division 2 Groups C and D
Attachments
-
- Air Inlet System
-
- Rectangular air inlet adapter
- Circular air inlet adapter
-
- Charging System
-
- Battery Charger 20 amp
-
- Connections
-
- Mechanical joint assembly
- Inlet connection
-
- Exhaust System
-
- Flexible fittings available at first production build
- Elbows and mufflers
-
- Instrumentation
-
- Optional interconnect harness
-
- Lube System
-
- Shipped with lube oil
-
- Mounting System
-
- Rails
-
- Power Take-offs
-
- Front stub shaft
-
- Literature
-
- Options available