Product Specs
Generator Set Specifications
- Minimum Rating
- 185R ekW (231 kVA) at 50hz, 224R ekW (280 kVA) at 60hz
- Maximum Rating
- 250R ekW (313 kVA) at 50hz, 300 ekW (375 kVA) at 60hz
- Frequency
- 50 Hertz & 60 Hertz
- Speed
- 1500 rpm @ 50Hz & 1800 rpm @ 60Hz
- Emissions/Fuel Strategy
- EPA Tier 3, IMO II, EU IW
Engine Specifications
- Aspiration
- Turbocharged Aftercooled
- Bore
- 4.13 in
- Stroke
- 5.31 in
- Fuel System
- Common Rail
- Engine Model
- C9.3
Generator Specifications
- Excitation
- Permanent Magnet
- Insulation
- Class H
- Number of Leads
- 12-Lead 2 wires per lead
- Voltage Regulator
- approx. 0.5%
- Drip Proof
- IP23
Generator Set Dimensions
- Height
- 56.5 in
- Length - Engine
- 85.8 in
- Weight - Approximate
- 5219 lb
- Width - Engine
- 50.4 in
Attachments
-
- Air System
-
- Air cleaner with integrated fumes disposal
-
- Control System
-
- Extension harnesses, MCS controller (MGCP III B, MGCP II), EMCP 4.2 control panel
-
- Generators & Generator Attachments
-
- RH or LH service, RTD module, potential transformer, power analyzer module, extension box, generator oversizing, IP44
-
- Fuel System
-
- Double wall fuel lines, manual or electric priming pump, simplex or duplex primary fuel filter, simplex or duplex secondary and tertiary fuel filter
-
- Lube System
-
- Simplex or duplex oil filter, manual sump pump and oil drain
-
- Starting System
-
- 24V electric starting motor, air starting motor, jacket water heater, charging alternator
-
- Protection System
-
- SOLAS fuel and oil shielding; safety shutdowns for low oil pressure, high water temperature, and overspeed
-
- Marine Classification Society (mcs) Approval –
-
- ABS, BV, DNV, LR, GL, PRS, RINA, CCS, RS